Pipe Tong Hydraulic Power Unit
Out of stock
- Our engine of choice is the Deutz TD201104i. We operate at 2000 rpm which gives optimum fuel economy.
- Aesthetically pleasing, professionally designed unit. Laser cut sheet metal adds to precision and good looks. “Oil-Field Tough” steel tubing frame is simple and rugged.
- Single central lifting point and fork pockets.
- Electrical interlocks so Deutz engine and PTO cannot both be run at the same time. (Option A)
- Larger reel drum to meet minimum bend radius on hoses for longer life. (Option B)
- Reel motors are located inside the drum for more compact profile. (Option B)
- Hydraulic throttle control with electrical over-ride for Deutz engine.
- 100 foot remote control cord controls Deutz engine speed for standard operation.
- Direct mount pump with large 1 ¼” splined shaft for long service life.
- Absolute rated 6 micron hydraulic filter.
- Pipe threads have been eliminated where possible for leak-free operation.
- Hydraulic oil tank holds 45 gallons (usable)
- Separate 29 gallon diesel tank. (Manufacturers prohibit body builders from tapping into truck fuel tanks.) Plus this makes for a modular, self-contained unit you
- an mount on a trailer.
- Durable cast-iron gear pumps.
- Safety gates protect engine side of unit. Gates swing out to open. Gates also lift out if swing room is not available.
- Size: 96 Inches across bed and 42 inches deep x 44 inches high (55” H with tool baskets); (62” H with reels). Overall width is 102 inches from reel to reel, which doesn’t interfere with mirror visibility. Takes up only 42 inches of valuable bed-space.
- Weight: 3100 lbs. with oil
- Optional remote shut down feature
- These units meet all California state regulations.
- Hydraulic flow: 60 GPM (high flow) 25 GPM (low flow)
- Hydraulic pressure: 1100 PSI—high/low shift, 2300 PSI max
- Electronic Throttle that eliminates the 100ft remote control cord.
- Hose reels that are retracted by hydraulic power.
- Redundant hydraulic power off of your truck PTO.
- Jib crane with hydraulic winch.
- Heavy duty front bumper
- Tool baskets.
- Lockable master electrical disconnect.
- Other brands of engines are available.
- Complete fabricated truck bed and tool boxes.
- Butterfly valve in engine air intake with cable trip. This is for emergency shut-down should the engine sniff flammable gas.
|Wet Weight (lb)||3100|
|Pressure Rating||2500 PSI|