Toggle Nav

HPX-75

In stock
SKU
FLUHPX75-60

Pipe Tong Hydraulic Power Unit

  • Our engine of choice is the Deutz TD201104i. We operate at 2000 rpm which gives optimum fuel economy.
  • Aesthetically pleasing, professionally designed unit. Laser cut sheet metal adds to precision and good looks. “Oil-Field Tough” steel tubing frame is simple and rugged.
  • Single central lifting point and fork pockets.
  • Electrical interlocks so Deutz engine and PTO cannot both be run at the same time. (Option A)
  • Larger reel drum to meet minimum bend radius on hoses for longer life. (Option B)
  • Reel motors are located inside the drum for more compact profile. (Option B)
  • Hydraulic throttle control with electrical over-ride for Deutz engine.
  • 100 foot remote control cord controls Deutz engine speed for standard operation.   
  • Direct mount pump with large 1 ¼” splined shaft for long service life.
  • Absolute rated 6 micron hydraulic filter.
  • Pipe threads have been eliminated where possible for leak-free operation.
  • Hydraulic oil tank holds 45 gallons (usable)
  • Separate 29 gallon diesel tank. (Manufacturers prohibit body builders from tapping into truck fuel tanks.) Plus this makes for a modular, self-contained unit you
  • an mount on a trailer.
  • Durable cast-iron gear pumps.
  • Safety gates protect engine side of unit. Gates swing out to open. Gates also lift out if swing room is not available.             
  • Size: 96 Inches across bed and 42 inches deep x 44 inches high (55” H with tool baskets); (62” H with reels). Overall width is 102 inches from reel to reel, which doesn’t interfere with mirror visibility. Takes up only 42 inches of valuable bed-space.
  • Weight: 3100 lbs. with oil
  • Optional remote shut down feature
  • These units meet all California state regulations.
  • Hydraulic flow: 60 GPM (high flow)   25 GPM (low flow)
  • Hydraulic pressure: 1100 PSI—high/low shift, 2300 PSI max
  • Electronic Throttle that eliminates the 100ft remote control cord.
  • Hose reels that are retracted by hydraulic power.

AvailableOptions:

  • Redundant hydraulic power off of your truck PTO.
  • Jib crane with hydraulic winch.
  • Heavy duty front bumper
  • Tool baskets.
  • Lockable master electrical disconnect.
  • Other brands of engines are available.
  • Complete fabricated truck bed and tool boxes.
  • Butterfly valve in engine air intake with cable trip. This is for emergency shut-down should the engine sniff flammable gas.
More Information
Horse Power 75
GPM 2 @ 650 PSI
Wet Weight (lb) 3100
Pump Double Stage
Drive Type Diesel
Applications PipeTongs
Pressure Rating 2500 PSI
SKU FLUHPX75-60
Manufacturer Fluidpro
Write Your Own Review
You're reviewing:HPX-75